Descripción
BW BWC2-M – Clip Series, 2-Year Single-Gas Detector, Carbon Monoxide (CO),(35 ppm to 200 ppm)
- Detects: Carbon monoxide (CO)
- Default alarm setpoints: 35 ppm to 200 ppm
- 2-Year Clip Series detector
- Maintenance-free: no sensor or battery changes necessary
- Compact, lightweight design with one-button operation
The BW BWC2-M is a Clip Series, single-gas detector used to detect Carbon Monoxide (CO) with a default alarm setpoint of 35 ppm (low) to 200 ppm (high). It operates up to 2 years maintenance-free: Just turn on the device and it runs continuously – no need for calibration, sensor replacement, battery replacement, or battery charging. That means great reliability and no downtime. You can put the device in a hibernation case when you’re not using it for a week or more – and extend its life by that period of time.
Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.
Unique advanced technology for safety, compliance and productivity.
- Surecell TM : unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions
- Reflex Technology TM : advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence
- IntelliDoX: instrument management system
- The quickest bump test in the industry
- Configuration of alarm set points and more
- Performing different tests for up to five BW Clip detectors at once — for maximum productivity
- Easy and accurate record-keeping
BW Clip Standard Features:
- Maintenance-free: no sensor or battery changes necessary
- Compact, lightweight design with one-button operation
- Designed for a range of harsh environments and extreme temperatures
- Hibernation mode with case accessory or IntelliDoX
- Automated self-test of battery, sensor and electronics
- Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
- Automatic logging of the 35 most recent gas events and bump test results
- Compatible with MicroDock II and Fleet Manager II software
- Affordable, with low cost of ownership
Configureable Options:
- Configuration of high and low alarm set points before the device is activated
- Adjustment of alarm set points and other parameters as needed throughout the lifespan
- Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
- Option to display gas reading during alarm
- User settable bump test reminder
- Option to display the Real Time Clock
The BW Clip maintenance-free single-gas detector is the most reliable, user-friendly, cost-effective way to keep workers safe and operations compliant. It delivers up to three years of protection – with no need for calibration, sensor replacement, battery replacement or battery charging.
Manufacturer Specs
| BW BWC2-M General Specifications | ||
| Size | 1.6 x 2.0 x 3.4 in. / 4.1 x 5.0 x 8.7 cm | |
| Weight | 3.2 oz. / 92 g | |
| Temperature | H2S | -40 to +122°F / -40 to +50°C |
| CO | -22 to +122°F / -30 to +50°C | |
| O2 | -4 to +122°F / -20 to +50°C | |
| SO2 | -22 to +122°F / -30 to +50°C | |
| Humidity | 5% – 95% RH (non-condensing) | |
| Alarms | Visual, vibrating, audible (95 dB) • Low, High | |
| Tests | Activated detectors automatically perform one internal diagnostic test every 24 hours. | |
| Typical battery life | Two years (H2S, CO, O2, or SO2) or three years (H2S or CO). Non-replaceable / non-chargeable lithium battery supplied | |
| Event logging | 35 most recent events | |
| Ingress Protection | IP 66/67 | |
| Certifiations and approvals |
UL | Class I, Div. 1, Gr. A, B, C, D Class I, Zone 0 , Gr. IIC |
| ATEX | CE 0539 II 1G Ex ia IIC T4 Ga IP66/67 DEMKO 14 ATEX 1356 |
|
| IECEx | Ex ia IIC T4 Ga IP66/67 IECEx UL 14.0063 |
|
| CE | European Conformity | |
| Warranty | Two or three years from activation (given normal operation), plus one year shelf life (6 months for O2). Up to three years for two-year H2S and CO detectors when used with the hibernation feature, limited to 24 months of detector operation. | |
| Sensor Specifi cations | ||||
| Gas | Measuring Range | Low Alarm Level | High Alarm Level | |
| 2 or 3 year detector | H2S | 0 -100 ppm | 10 ppm | 15 ppm |
| CO | 0 – 300 ppm | 35 ppm | 200 ppm | |
| 2 year detector only | O2 | 0 – 25.0 % by vol. | 19.5 % | 23.5 % |
| SO2 | 0 – 100 ppm | 5 ppm | 10 ppm | |
| Alarm setpoints are user adjustable before and after activating the detector. Set points shown are default values as shipped from the manufacturer. Additional default values are available. |
||||
Tech Specs
Gas Detection/Personal Gas Detection Template |
|
|---|---|
| Number of Gases | Single |
| Gas Types | CO |
| Alarm (Personal Gas Detector) | Audible, Audible-Visible-Vibrating, Vibrating, Visual |
| Type (Gas Detection) | Portable |
| CO | Yes |
| Min Measurement Range CO | 0 PPM |
| Max Measurement Range CO | 300 PPM |
Gas Detection/Carbon Monoxide Meters Template |
|
| Type of Alarm | Audible, Vibrating, Visual |
Test Equipment General Attributes |
|
| Warranty | 2 YEARS |
| Warranty Details | Two or Three years from activation (given normal operation) plus one year shelf life (6 months for O2 mode).
Up to three years from activation for two year H2S and CO detectors when used with the hibernation feature, limited by 24 months of detector operation. |
| Safety Approval | ATEX, CE, CSA, UL |
| IP Rating | IP66, IP67 |
| Product Weight | 92 GRAMS (0.2028 LBS) |
| Product Height | 2.25 IN |
| Product Length | 5.00 IN |
| Product Width | 3.25 IN |
| HTS/Schedule B Number | 9027.10.2000 |
| ECCN Number | EAR99 |
| Power Supply Voltage | Battery Powered |
| Country of Origin | Mexico |
| Shipping Height | 2.25 IN |
| Shipping Length | 5.00 IN |
| Shipping Width | 3.25 IN |
Valoraciones
No hay valoraciones aún.