Descripción
YSI IDS 4410W
FDO Probe with Temperature Wireless Sensor
_probe_with_Temperature_Sensor.jpg) |
|
The IDS sensors automatically store their unique serial number and calibration data. In addition, they also digitally process the measurement signal. The IDS sensors can be moved from instrument to instrument and maintain their calibration data and transmit that information to the new instrument.
One WA-S wireless sensor module must be installed at the top of each wireless sensor, while one WA-M wireless meter module is needed per MultiLab meter. We suggest the MultiLab WA Kit if wireless sensors will be used, as it includes one WA-S wireless sensor module, one WA-M wireless meter module, one charger for WA-S modules, and one USB power supply for the WA-S charger.
Wireless sensors can only be used with the MultiLab 4010-1W, MultiLab 4010-2W, and the MultiLab 4010-3W. Wireless sensors can be used with the MultiLab 4010-1 if the latest instrument firmware has been installed – see the Software and Firmware Downloads page.
The 4310W probe can only be calibrated with a 1,413 uS/cm conductivity standard (060906) (Select in «Option» drop down menu).
- Shaft
- Connecting head with active sensor electronics
- Connection cable (FDO 4410)
- IDS plug (FDO 4410W)
- Protective hood
- Sensor membrane
- SC-FDO 4410 sensor cap with memory chip
- Gold-plated contacts for the memory chip of the sensor cap
- Locking device
- Measurement window
- O-ring
- Thermistor enclosure with temperature sensor
Manufacturer Specs
| General Specifications | |
| Measuring principle | Optical measurement based on photoluminescence. |
| Temperature sensor | Integrated NTC 30 (30 kΩ at 25 °C / 77 °F) |
| Weights | 107 g |
| Materials | |
| Shaft | POM |
| Connection head | POM |
| Sensor cap | PVC, silicone and PMMA |
| Sensor head | POM, PV and PMMA |
| Sensor head – sensor cap contacts | Brass, gold-plated |
| Thermistor housing | VA steel 1.4571 |
| Protective hood | VA steel 1.4571 |
| Seals | FPM (Viton) |
| Connection Cable | |
| Lengths | FDO 4410W: 1,5 / 3 m |
| Diameter | 4.3 mm |
| Smallest allowed bend radius | Fixed installation: 20 mm Flexible use: 60 mm |
| Plug type | Socket, 4 pins |
| IDS plug (FDO 4410W) | |
| Connection type | 4-pole, watertight plug connection with lock, reverse polarity protected |
| Materials | Synthetic materials: Glass fiber reinforced Noryl, TPU, TPC-ET, POM, PEEK, PBT O-ring: FPM Contacts gold-plated |
| Pressure resistance | |
| Sensor with connection cable | IP 68 (1 x 106 Pa or 10 bar) |
| Cable plug (FDO 4410) | IP 67 (when plugged in) |
| The FDO 4410(W) meets the requirements according to article 3(3) of the 97/23/EC directive («Pressure equipment directive»). | |
| Measurement conditions | |
| Measuring ranges at 20 °C (68 °F) | 0 … 20 mg/l D.O. 0 … 200 % D.O. saturation 0 … 400 mbar D.O. partial pressure |
| Temperature range | 0 … 50 °C (32 … 122 °F) |
| Max. admissible overpressure | 1 x 106 Pa (10 bar) |
| Immersion depth | min. 6 cm max. 100 m (depending on the cable length) |
| Operating position | any |
| Approach flow | not required |
| Storage conditions | |
| Recommended storing method | in the check and storage vessel, FDO Check |
| Storage temperature | 0 … 50 °C (32 … 122 °F) |
| Characteristic data on delivery | |
| Accuracy of D.O. measurement at 20 °C (68 °F) in airsaturated water |
± 1.5 % |
| Zero signal | ≤ 0.02 mg/l O2 ≤ 0.2 % O2 saturation ≤ 0.4 mbar O2 partial pressure |
| Response time at 20 °C (68 °F) in stirred solution | t90 (90 % of the final value display after) < 30 s t95 (95 % of the final value display after) < 45 s t99 (99 % of the final value display after) < 60 s |
| Response time of temperature measurement | t99 (99 % of the final value display after) < 60 s |
| Precision of temperature measurement | ± 0.2 K |
| Working life of the sensor cap | Min. 1 year with authorized use |
Tech Specs
Dataloggers / Data Acquisition/Dataloggers for Environmental Variables/Temperature Dataloggers Templ |
|
|---|---|
| Max Temperature | 50 C |
Test Equipment General Attributes |
|
| Product Weight | 107 GRAMS (0.236 LBS) |
Valoraciones
No hay valoraciones aún.