Data Logger Comark RF312DUALPLUS – WiFi Dual Channel with Thermistor Probes

• Local Max and Min readings on the LCD
• Capable of logging greater than 1 million data entries
• Memory stores all data even if WiFi is temporarily disconnected
• Fully featured LCD display

The RF312DualPlus WiFi Dual Channel Data Logger with High Accuracy ‘Plus’ Specification Thermistor Probes can measure two temperature points with a single unit. The two probes can measure the environment in which they are situated e.g. one could measure a refrigerator and the other could measure a freezer. This high accuracy data logger is accurate to ±0.2°C* (-15°C to +80°C) / ±0.4°F (+5°F to +176°F). The unit comes with a bracket that can be used to mount the data logger on a wall or surface. The probes are connected to the Data Logger via a 160mm Y splitter cable which is provided.

*Using the supplied Penetration/Air Probe.

The Logger is supplied with two multipurpose test probes. This logger is compatible with the regular RFAXxxxJ probes with the following accuracy specifications ±0.3°C (0°C to +70°C) / ±0.6°F (+32°F to +158°F), please see list of compatible probes below.

Data is streamed wirelessly to either the Comark Cloud or a local PC. If the data logger temporarily loses connectivity with the network, it will log readings until the connection is re-established (max 30 days at 10 second sample interval).

Setup your loggers quickly and easily with the free PC software, after which all configuration is handled from the Cloud. See the Downloads section, under the Support Tab.

The RF312DualPlus WiFi Dual Channel Data Logger with two probes, is a low power device containing a rechargeable battery. When configured, the data logger can operate for up to six months*. The battery can be recharged via a standard +5V wall adapter RF320 (UK/US) or a USB port using the cable provided. The LCD display includes several features including Max and Min readings and indicators for battery state, alarms, RF312 connection and signal strength.