Medición de Electricidad
Mostrando 235–243 de 349 resultadosOrdenado por los últimos
-
Medición de ElectricidadAsistente de calibración Fluke 154 US/CAN Multifunction Calibrators – Type: Hand Held, Hart Compatible: Yes, FieldBus Compatible: No
Fluke 154 US/CAN HART Communications/Diagnostics Calibration Assistant
- 154 HART Calibration Assistant
- Full HART Device Description (DD) support of all HART devices
- Configure HART devices
- Perform HART trim on HART devices when used with a Fluke 750, or 720 series calibrator
- Monitor device PV, SV, TV, QV and other measured HART variables
- Quarterly HART DD updates for free
- Convenient wireless connectivity to HART modem
- Easy to use, fast connect and view HART data
- Store HART device configurations
- Long range wireless communication up to 250 feet.
(0 reviews) -
Medición de ElectricidadMultímetro y amperímetro Fluke 789/773 BU 789 Process Meter and 773 Milliamp Process Meter
FLUKE – 789 AND 773 BUNDLE PACKAGE
- Fluke 789 Process Meter Features
- 24 V Loop power supply
- Very large dual display
- Enhanced backlight with 2 brightness settings
- 1200 Ohm drive capability on mA source
- HART mode setting with loop power and a built-in 250 ohm resistor
- 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
- Externally accessible fuses for easy replacement
- Infrared-port to process data in FlukeView Forms (V2.1) software
- Precision 1000 V, 440 mA True-RMS digital Multimeter
- DMM designed to meet 1000 volt IEC 1010 CAT III standards
- Frequency measurement to 20 kHz
- Min/Max/Average/Hold/Relative modes
- Diode Test and Continuity Beeper
- Simultaneous mA and % of scale readout.
(0 reviews) - Fluke 789 Process Meter Features
-
Medición de ElectricidadCalibrador automático de presión Fluke 729 300G FC
Fluke 729 300G FC Automatic Pressure Calibrator with Fluke Connect Compatibility, 300 psi, 20 Bar
- 729 300G FC, 300 PSI, 20 Bar Automatic Pressure Calibrator, W/FC
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
- Measure, source and simulate 4 to 20 mA signals
- 24V loop power for powering transmitters for tests
- Bright dual/triple-channel color graphical display
- HART communication for testing HART smart transmitters
- Built-in leak testing for verifying test setups for leakage
- Rugged portable design with standard 3-year warranty
- Fluke Connect® App compatibility
- Measure temperature with optional 720RTD probe
- Measure Vdc for testing 1 V dc to 5 V dc output transmitters
- Compatible with 700 Series and 750 Series pressure modules
- Upload documented test results to DPCTrack2™ Calibration Management.
(0 reviews) -
Medición de ElectricidadCalibrador de procesos multifunción Fluke 725Ex Intrinsically Safe
Fluke 725EX Intrinsically Safe Multifunction Process Calibrator
- Intrinsically safe multifunction process calibrator
- Features ATEX II 1 G Ex ia IIB 171°C KEMA 04ATEX 1303X compliant
- Meets I.S. Class I, Division 1 Groups B-D, 171°C compliance standards
- Measures volts DC, mA, RTDs, thermocouples, frequency, and ohms
- Sources or simulates volts DC, mA, RTDs, thermocouples, frequency and ohms.
(0 reviews) -
Medición de ElectricidadCalibrador de lazo de precisión Fluke 709H HART
DOCUMENTING PROCESS CALIBRATOR, NON BUS
- THIS MODEL DOES NOT OFFER HART COMMUNICATION
- IF YOU REQUIRE HART COMMUNICATION, PLEASE SEE FLUKE 754
- Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
- Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
- Power transmitters during test using loop supply with simultaneous mA measurement
- Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
- Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
- Holds up to a full week of downloaded procedures and calibration results.
- Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.
(0 reviews) -
Medición de ElectricidadCalibrador de procesos multifunción de precisión Fluke 726
Fluke 726 Precision Multifunction Process Calibrator
- More precise measurement and calibration source performance, accuracies of 0.01%.
- Two separate channels; measure, source and view process signals simultaneously
- Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
- Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters
- Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
- Source mA with simultaneous pressure measurement to conduct valve and I/P tests
- Integrated pressure switch test allows you to capture the set, reset and deadband of a switch
- Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis.
(0 reviews) -
Medición de ElectricidadMultímetro de procesos Fluke 789/IR3000 BU 789 and IR3000FC Connector Bundle Package
Fluke 789/IR3000 BU ProcessMeter with HART Communications/Diagnostics with Fluke Connect Compatibility
- Fluke 789 Process Meter Features
- 24 V Loop power supply
- Very large dual display
- Enhanced backlight with 2 brightness settings
- 1200 Ohm drive capability on mA source
- HART mode setting with loop power and a built-in 250 ohm resistor
- 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
- Externally accessible fuses for easy replacement
- Infrared-port to process data in FlukeView Forms (V2.1) software
- Precision 1000 V, 440 mA True-RMS digital Multimeter
- DMM designed to meet 1000 volt IEC 1010 CAT III standards
- Frequency measurement to 20 kHz
- Min/Max/Average/Hold/Relative modes
- Diode Test and Continuity Beeper
- Simultaneous mA and % of scale readout.
(0 reviews) - Fluke 789 Process Meter Features
-
Medición de ElectricidadCalibrador y documentador de procesos Fluke 754 – HART
DOCUMENTING PROCESS CALIBRATOR with HART Communications
- Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
- Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
- Power transmitters during test using loop supply with simultaneous mA measurement
- Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
- Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
- Holds up to a full week of downloaded procedures and calibration results
- Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.
- Bright white dual display. Read both sourced and measured parameters simultaneously.
(0 reviews) -
Medición de ElectricidadMedidor de procesos Fluke 789 with 250 Ohm HART Resistor
Fluke 789 ProcessMeter with HART Communications/Diagnostics
- 24 V Loop power supply
- Very large dual display
- Enhanced backlight with 2 brightness settings
- 1200 Ohm drive capability on mA source
- HART mode setting with loop power and a built-in 250 ohm resistor
- 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
- Externally accessible fuses for easy replacement
- Infrared-port to process data in FlukeView Forms (V2.1) software
- Precision 1000 V, 440 mA True-RMS digital Multimeter
- DMM designed to meet 1000 volt IEC 1010 CAT III standards
- Frequency measurement to 20 kHz
- Min/Max/Average/Hold/Relative modes
- Diode Test and Continuity Beeper
- Simultaneous mA and % of scale readout.
(0 reviews)