Shop
Mostrando 1279–1287 de 2214 resultadosOrdenado por los últimos
-
Medición de ElectricidadMultímetro de procesos Fluke 789 FC/T3000 Fluke Connect ProcessMeter/Temp Kit
FLUKE CONNECT PROCESSMETER/TEMP MEASURE KIT
- Fluke Connect ProcessMeter/Temp Measure
- Unique new wireless measurement logging capability
- Temperature measurement from -200 °C to 1372 °C using the t3000 FC
- 24 V Loop power supply
- HART mode setting with loop power (adds 250 ohm resistor)
- 100 % larger dual display
- 1200 ohm drive capability on mA source
- Enhanced backlight with two brightness settings
- 0 % to 100 % mA Span Check buttons to toggle between 4 and 20 mA
- Infrared I/O serial port compatible with FlukeView® Forms Software Version 2.1
- Externally accessible fuses for easy replacement
These 787 features are also included in the 789:
- DMM designed to meet 1000 volt IEC 1010 CAT III standards
- Precision 1000 V, 440 mA true-rms digital multimeter.
(0 reviews) -
Medición de ElectricidadCalibrador y documentador de procesos Fluke 754/750SW BU Fluke 754 DPC AND 750SW DPCTRACK2 Bundle Package
Fluke 754/750SW BU Documenting Process Calibrator with HART Communications/Diagnostics, DPC/Track2
- Get the full Fluke 750SW version instead of trial version
- Improved user interface
- Improved Multi-COM port support
- Drywell source mode support
- Reminders Screen
- DPCTrack Explorer
- User Defined Labels and Variables
- Keep on Schedule and End of Month scheduling
- More Reports
- Equipment/Loops.
(0 reviews) -
Medición de ElectricidadCalibrador de procesos Fluke 754/154 BU 754 and 154 HART Calibration Assistant Bundle w/ Rugged Case
Fluke 754/154 BU Documenting Process Calibrator with HART Communications/Diagnostic, Carrying Case
- Fluke 754 Documenting Process Calibrator-HART
- Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
- Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
- Power transmitters during test using loop supply with simultaneous mA measurement
- Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
- Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
- 154 HART Calibration Assistant
- Full HART Device Description (DD) support of all HART devices
- Configure HART devices
- Perform HART trim on HART devices when used with a Fluke 750, or 720 series calibrator.
(0 reviews) -
Medición de ElectricidadCalibrador de procesos multifunción Fluke 7526A-156
PRECISION PROCESS CALIBRATOR, 115V
- Sources and measures dc voltage, current, resistance, RTDs and thermocouples
- Precision pressure measurement using Fluke 700 series pressure modules
- Includes 24 V dc transmitter loop power supply
- Measures 4-20 mA loop current
- Includes automated switch-test function
- Accepts ITS-90 coefficients for accurate SPRT measurements
- Compatible with MET/CAL® Calibration Software.
(0 reviews) -
Medición de PresiónCalibrador de presión Fluke 729/750SW BU with DPCTrack2 Bundle with Fluke Connect
729 PLUS DPCTRACK2 BUNDLE, 300 PSI, 20 BAR AUTOMATIC PRESSURE CALIBRATOR, W/FC
- Bundle kit with DPCTRACK2 PC Software
- For 300 PSI, 20 Bar
- 729 includes Fluke Connect
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
- Measure, source and simulate 4 to 20 mA signals
- 24V loop power for powering transmitters for tests
- Bright dual/triple-channel color graphical display
- HART communication for testing HART smart transmitters
- Built-in leak testing for verifying test setups for leakage
- Rugged portable design with standard 3-year warranty
- Fluke Connect® App compatibility
- Measure temperature with optional 720RTD probe
- Measure Vdc for testing 1 V dc to 5 V dc output transmitters.
(0 reviews) -
Medición de PresiónCalibrador automático de presión Fluke 729 300G
FLUKE-729 300, 300 PSI, 20 BAR AUTOMATIC PRESSURE CALIBRATOR
- 729 300, 300 PSI, 20 Bar Automatic Pressure Calibrator, W/FC
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
- Measure, source and simulate 4 to 20 mA signals
- 24V loop power for powering transmitters for tests
- Bright dual/triple-channel color graphical display
- HART communication for testing HART smart transmitters
- Built-in leak testing for verifying test setups for leakage
- Rugged portable design with standard 3-year warranty
- Measure temperature with optional 720RTD probe
- Measure Vdc for testing 1 V dc to 5 V dc output transmitters
- Compatible with 700 Series and 750 Series pressure modules
- Upload documented test results to DPCTrack2™ Calibration Managemen.
(0 reviews) -
Medición de PresiónCalibrador automático de presión Fluke 729 30G
FLUKE-729 30G, 30 PSI, 2 BAR AUTOMATIC PRESSURE CALIBRATOR
- 729 30G, 30 PSI, 2 Bar Automatic Pressure Calibrator, W/FC
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
- Measure, source and simulate 4 to 20 mA signals
- 24V loop power for powering transmitters for tests
- Bright dual/triple-channel color graphical display
- HART communication for testing HART smart transmitters
- Built-in leak testing for verifying test setups for leakage
- Rugged portable design with standard 3-year warranty
- Measure temperature with optional 720RTD probe
- Measure Vdc for testing 1 V dc to 5 V dc output transmitters
- Compatible with 700 Series and 750 Series pressure modules
- Upload documented test results to DPCTrack2™ Calibration Management Software.
(0 reviews) -
Medición de PresiónCalibrador automático de presión Fluke 729 150G FC
Fluke 729 150G FC Automatic Pressure Calibrator with Fluke Connect Compatibility, 150 psi, 10 Bar
- 729 150G FC, 150 PSI, 10 Bar Automatic Pressure Calibrator, W/FC
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
- Measure, source and simulate 4 to 20 mA signals
- 24V loop power for powering transmitters for tests
- Bright dual/triple-channel color graphical display
- HART communication for testing HART smart transmitters
- Built-in leak testing for verifying test setups for leakage
- Rugged portable design with standard 3-year warranty
- Fluke Connect® App compatibility
- Measure temperature with optional 720RTD probe
- Measure Vdc for testing 1 V dc to 5 V dc output transmitters
- Compatible with 700 Series and 750 Series pressure modules.
(0 reviews) -
Medición de PresiónCalibrador automático de presión Fluke 729 150G
FLUKE-729 150G, 150 PSI, 10 BAR AUTOMATIC PRESSURE CALIBRATOR
- 729 150G Portable Automatic Pressure Calibrator
- Automatic pressure generation and regulation to 300 psi
- Easily document the process using onboard test templates
- Automatic internal fine-pressure adjustment
- Measure, source and simulate 4 to 20 mA signals
- 24V loop power for powering transmitters for tests
- Bright dual/triple-channel color graphical display
- HART communication for testing HART smart transmitters
- Built-in leak testing for verifying test setups for leakage
- Rugged portable design with standard 3-year warranty
- Measure temperature with optional 720RTD probe
- Measure Vdc for testing 1 V dc to 5 V dc output transmitters
- Compatible with 700 Series and 750 Series pressure modules
- Upload documented test results to DPCTrack2™ Calibration Management.
(0 reviews)